"The Wireless Weight Measurement Kit is a one of a kind, easy-to-use solution for weight and load measurements," says Div Harish, co-founder & CEO of Loadstar Sensors Inc. "Users don't have to struggle to put together a large number of disparate components. Just connect the sensors to the display and the power adapter provided in the kit and you are ready to start taking measurements. Place a plate on the sensors and you have a scale!"
The components of the weight measurement kit provide several key features that make it easy for users to build an accurate and reliable load measurement system:
CS-Series Sensors
* Integrated electronics require no additional signal conditioner. This helps cut down the number of components required to put together a weight measurement system.
* Compact and rugged stainless steel packaging makes it possible to build devices that can withstand rough handling.
* Small size and threaded mounting holes provided on the top and bottom of the sensors, makes it possible to mount them conveniently and fit them into tight spaces.
* Low power consumption (only 10mW) makes them suitable for use with batteries, if desired.
DS-2100 WiFi display
* Accepts input from up to four CS-Series load sensors and automatically sum loads from all connected sensors. No separate summing box is required.
* Displays calibrated loads in pounds in increments of 0.1 lb up to 999.9 lbs. on a bright red LED display
* Can connect wirelessly to a PC using 802.11b WiFi interface. This makes it possible for users to calibrate the weight measurement system as well as log readings on the PC without any connecting wires.
LoadVUE software
* Connects wirelessly with the DS-2100 WiFi device to enable users to perform calibration on up to four attached sensors from a PC, display individual and total loads on screen, and log to a data file.
